Mobility Site - View Single Post - Error message: "Unable to obtain a serrver assigned IP address..."

mikeleev · 10-24-07, 01:42 AM

I have to say that I don't have a final word on this, but I made this experiment (every time I used the cradle I was getting the error)

1. Turn On the Axim
2. Start > Settings > Connections > Dell Wlan Utility
3. Click (tap) Setting > Click (tap) Remote NDis Host*
4. Add an IP (I have heard that 169.254.2.1 should be used, but I don't know why so I tried to see the result of 192.168.1.190) Subnet mask 255.255.255.0Default Gateway (blank)
5. OK, OK, OK

It seems to be working and the annoying message is gone. If you guys know why I should add 169.254.2.1 instead. Or you have another suggestions , do not hesitate to correct me.

Thanks,
Michael.

* Network Driver Interface Specification (NDIS)

10-24-07, 01:42 AM	#33 (permalink)
mikeleev Aximsite Prospect Join Date: Oct 2007 Posts: 1 Thanked 0 Times in 0 Posts	how I fixed it I have to say that I don't have a final word on this, but I made this experiment (every time I used the cradle I was getting the error) 1. Turn On the Axim 2. Start > Settings > Connections > Dell Wlan Utility 3. Click (tap) Setting > Click (tap) Remote NDis Host* 4. Add an IP (I have heard that 169.254.2.1 should be used, but I don't know why so I tried to see the result of 192.168.1.190) Subnet mask 255.255.255.0Default Gateway (blank) 5. OK, OK, OK It seems to be working and the annoying message is gone. If you guys know why I should add 169.254.2.1 instead. Or you have another suggestions , do not hesitate to correct me. Thanks, Michael. * Network Driver Interface Specification (NDIS)