Originally Posted by mrj76
|
|
I have attempted to flash for two days an no luck. I got the restore factory default screen asking me to select the contact icon or the envelop icon. No matter which I select I get a blank screen. What should I do ?
|
In order to do a ROM update your unit does need to be connected to a AC power supply. Second you need to push the on button, the middle button on the left hand side of the unit and insert you stylus into the hard reset hole on the back of the unit. After holding that position for a second and the screen remains black remove the stylus but continue holding in the other buttons. Within 2-3 seconds the bootloader screen will start, when it does you can stop holding any buttons down. The bootloader appliction will scan your FAT32 formated SD card to confirm the ROM upgrade files present on it at the root level. Select one by using the rocker D button moving up or down sides of the D button. When the ROM you want to flash has been highlighted in blue push the center area of the D button and away you go. :approve: