Rlarson_mn,
I did not explain fully in my original post. I get to the update finish screen after flashing . The one that tell you to do a hard rest. But when I try to do the hard reset is when I encounter the envelop and contact icon screen asking me to if I want to restore factory defaults.
Form my reading of the forum it seems as if my bootloader (wifi+power+ reset) works but the hard rest(power+ reset) does not.
I have attempted to flash the following, all with the same results
DiAd_K_AximX51v_WM5_A12EN.nb0
DiAd_K_AximX51v_WM6_1_A07EN.nb0
DiAd_K_AximX51v_WM6_A03EN.nb0.
When my bootloader reads the sd card at the top it has sd image A02
I have an x51 by the way
Any help is greatly appreciated as I gave this axim to my wife a year and now that i have attempted to improve what was not broke....
Yep you guessed it I am in the dog house.
Originally Posted by rlarson_mn
|
|
In order to do a ROM update your unit does need to be connected to a AC power supply. Second you need to push the on button, the middle button on the left hand side of the unit and insert you stylus into the hard reset hole on the back of the unit. After holding that position for a second and the screen remains black remove the stylus but continue holding in the other buttons. Within 2-3 seconds the bootloader screen will start, when it does you can stop holding any buttons down. The bootloader appliction will scan your FAT32 formated SD card to confirm the ROM upgrade files present on it at the root level. Select one by using the rocker D button moving up or down sides of the D button. When the ROM you want to flash has been highlighted in blue push the center area of the D button and away you go. :approve:
|