|
The connector itself is probably fine, just came off of the board. If you are good with a soldering iron you should be able to touch the pins and re-melt the solder. Put a bit of glue on the connector to hold it down and it should work. I haven't tried this on the internal connector, but my dock connector broke and I had to fix it by re-melting the solder and gluing the connector in place. It works fine now.
Same thing goes for the headphone jack, mine was cutting out on the right speaker so (after a long period of trying to fix the port itself which I thought was the problem) I soldered the connector and it works fine now.
|