This is great and I am now in A12. Thank you a thousand fold (for each time I tried to reset the axim) But I have one question. Although I now have A12 loaded I still cannot do a hard reset. That screen flashes by. Is there anything I can do to be able to do a hard reset? Thanks
|
Originally Posted by amo77
|
Some instructions:
- Enter to SD bootloader mode:
1. Press and hold Wi-fi button (wait for 1 sec?)
2. While pressing W-Fi, press and hold Power button (again, wait for 2 sec)
3. Briefly press and release reset button, keep holding Wifi and Power until SD loader screen appears.
- Create CRC file:
1. in text editor (eg. Notepad) create new text file following this rule:
-if img file name is blah_blah.nb0 then crc file name will be blah_blah_nb0.crc
2. inside the file type some 8 chars (eg. 12345678). File size should be 8 bytes.
3. Copy .nb0 and .crc files on previously FAT 32 re-formatted SD card.
4. Inser SD card into Axim and Start SD boot loader.
5. Start image loading proccess by clicking twice on action button
6. Process will start and continue for about 5-10 mins. Then error message will pop saying that CRC is incorrect and programme will give you correct CRC number for the image, consisting of 8 chars (eg 1468E194).
7. Type thouse chars instead of dummy ones in .crc file.
Good luck, and don't forget, you are doing it on your own risk and no one is taking responsibility if something went wrong with your pocket pc and it wont be covered by Dell waranty.
|