|
A number of things to be aware of:
- The PC must be capable of being a DHCP client. The Axim will provide an address that the PC will use. If this is not possible, you might be able to configure the networking adapter layers to have the correct IP address for the Axim to connect to, but I haven't tried that.
- The ActiveSync must be installed BEFORE connecting the device. When you plug the cradle and axim in to the usb before you load activesync, a device is added in the hardware manager and xp tries to find a driver for it. That will fail because there are no drivers for the axim. Active sync will not work if this device is present in the device manager. Delete the axim device in the device manager, de-install ActiveSync, reboot the PC with the axim OUT of the cradle. Once the the PC is booted and you have re-installed and loaded activesync THEN put the axim in the cradle.
- With ActiveSync V4.x you can't sync over WiFi to a PC. You can sync WiFi to an Internet point and then to an Exchange server. You can sync over BlueTooth or Infrared to a PC.
|