Originally Posted by PamAxim
|
I have never had a problem using Bluetooth to sync my device.
All I did was make sure bluetooth was turned "on" on my laptop, then I clicked on the bluetooth icon on my x51v and turned bluetooth "on". Next, I went to the <devices> tab (x51v) and set up a new partnership. My x51v found my laptop immediately - I clicked on my laptop and checked the activesync box. Finally, I brought up activesync and chose <menu>Connect via bluetooth. Everything worked fine from here. :approve:
I hope this helps - 
|
I followed this procedure but with the following doubts:
1) When I choose for a new partnership, and it connects, it openned services, like COM ports. Should I select COM services?
2) If I select COM services, there are 02 possibilities, Incoming and Outcoming. According Axim instruction manual I should select incoming and I did.
It starts the activesync and stops. I had the same problem with a Mio, and using the same bluetooth pen drive and driver. It is possible the problem is in the laptop. I will try to find another driver. This blue tooth pen drive uses a Bluesoleil software that I do not like. It is so complicated and may be it is the problem.
Please confirm me if you select COM service when making the partnership or just stops at this point.
Many thanks for your help.