Mobility Site - View Single Post - Linksys WCF11 & Windows Mobile 2003 Success

Satjoh · 09-16-03, 11:59 AM

I am about to give up........................
Can't get my Axim (updated with 05 Rom) to work with my Linksys WCF11 CF Card.
Performed a hard reset (just to be sure, have been trying other drivers too), installed the Senoa driver.
Everything OK so far, have 2 (!) entries "802.11b Wireless LAN PC Card" but cannot connect to my Edimac EW-7205AP Access Point.
The green light on the WCF11 keeps blinking.
In going through all the settings on my Axim I found out that under the power settings is a "wireless" tab. The radio button says "wireless signals off" and it cannot be changed to the "on" status.
Any help is appreciated.

09-16-03, 11:59 AM	#4 (permalink)
Satjoh Aximsite Prospect Join Date: Sep 2003 Posts: 5 Thanked 0 Times in 0 Posts	I am about to give up........................ Can't get my Axim (updated with 05 Rom) to work with my Linksys WCF11 CF Card. Performed a hard reset (just to be sure, have been trying other drivers too), installed the Senoa driver. Everything OK so far, have 2 (!) entries "802.11b Wireless LAN PC Card" but cannot connect to my Edimac EW-7205AP Access Point. The green light on the WCF11 keeps blinking. In going through all the settings on my Axim I found out that under the power settings is a "wireless" tab. The radio button says "wireless signals off" and it cannot be changed to the "on" status. Any help is appreciated. __________________ Dell Axim X5 XScale 400 Rom A05 Windows Mobile 2003 Dell 1180 CF Card Rikaline GPS-6021-X6