View Single Post
Old 02-19-03, 12:02 PM   #8 (permalink)
tucker8235
Aximsite Prospect
 
Join Date: Feb 2003
Location: Ga.
Posts: 7
Thanked 0 Times in 0 Posts
Not really since I have yet to see a card with 802.11a in cf format. In pcmcia though it is for the wireless networks that run on 5ghz range(making them faster). Below is a paste of some info about them all. I would feel pretty certain that she is running "b" (because "a" is more expensive and pretty much just came out) but I would ask her to be on the safe side. If she is running "a" then you'll probably just have to wait until cf cards come out supporting it. Hope this answers your question.


802.11 refers to a family of specifications developed by the IEEE for wireless LAN technology. 802.11 specifies an over-the-air interface between a wireless client and a base station or between two wireless clients. The IEEE accepted the specification in 1997.
There are several specifications in the 802.11 family:

802.11 -- applies to wireless LANs and provides 1 or 2 Mbps transmission in the 2.4 GHz band using either frequency hopping spread spectrum (FHSS) or direct sequence spread spectrum (DSSS).
802.11a -- an extension to 802.11 that applies to wireless LANs and provides up to 54 Mbps in the 5GHz band. 802.11a uses an orthogonal frequency division multiplexing encoding scheme rather than FHSS or DSSS.
802.11b (also referred to as 802.11 High Rate or Wi-Fi) -- an extension to 802.11 that applies to wireless LANS and provides 11 Mbps transmission (with a fallback to 5.5, 2 and 1 Mbps) in the 2.4 GHz band. 802.11b uses only DSSS. 802.11b was a 1999 ratification to the original 802.11 standard, allowing wireless functionality comparable to Ethernet.
802.11g -- applies to wireless LANs and provides 20+ Mbps in the 2.4 GHz band.
tucker8235 is offline   Reply With Quote