|
Ok I have the same problem with the D-link 614+ abd the DCF660w. I spent time with DLink and they concluded that they did not know what the problem was and the Axim is NOT on their list of capatability. So heres what I concluded and fixed.
The DCF660 is not getting DHCP correctly so
:
1. If the light on the DCF is on continuously Go onto your router set up and see what IPaddress has been assigned to the card (ex. 192.168.0.100)
2. Also find out from your router what DNS addresses your provider has provided your whole network.
3. Go to Start then settings then connections then network adapters then DCF660W then properties
4. Click on "Use Specific IP Address" and enter the value found in 1 above
5. Enter subnet 255 255 255 0
6 Set "Default gateway to the routers setup address. Also found when you entered the router itself.
7 Now at the bottom of the screen click on "Name servers"
8 Enter the DNS values found in 2 above. Ignore the WINS values.
9. Pull out card and then put it back. Do a warm reset
10 It should work mine did.
Hope I have explained well enough but email me or ask question here and I will try to help.
Al
|