Mobility Site - View Single Post

JakeRich · 04-07-03, 09:35 AM

Check your activesync settings. Make sure you don't have it set to sync on a schedule when in the cradle.

Activesync>Tools>Options>Schedule

Also, activesync starts up whenever it sees activity on the USB port, so any spurious signals there will wake up the Axim.

BTW, you never really turn the Axim fully off. It's running constantly so it can alert you for alarms, appointments, etc. It also wakes up whenever it is connected to the cradle/cable and whenever a card (SD or CF) is inserted or removed. Clicking the power button turns the screen off, and puts the Ax in minimum power mode, but not really OFF.

04-07-03, 09:35 AM	#2 (permalink)
JakeRich Aximsite Hall of Fame Join Date: Nov 2003 Posts: 7,873 Thanked 1 Time in 1 Post	Check your activesync settings. Make sure you don't have it set to sync on a schedule when in the cradle. Activesync>Tools>Options>Schedule Also, activesync starts up whenever it sees activity on the USB port, so any spurious signals there will wake up the Axim. BTW, you never really turn the Axim fully off. It's running constantly so it can alert you for alarms, appointments, etc. It also wakes up whenever it is connected to the cradle/cable and whenever a card (SD or CF) is inserted or removed. Clicking the power button turns the screen off, and puts the Ax in minimum power mode, but not really OFF. Last edited by JakeRich; 04-07-03 at 09:42 AM.