Mobility Site - View Single Post

would · 03-15-05, 06:16 PM

ok guys,

i had the same problems. after many many hours of trying i solve this problem. here is what i did:

1. i disabled the windows-firewall for my WLan-connection on my notebook and suddently everything worked fine .
2. enabled the firewall again and opened the system for ports 990,999,5678 and 5679 (AS ports). BUT: DIDN'T WORK
3. disabled the firewall again : WLAN ASYNC WORKED AGAIN
4. tried to open the ports under firewall -> extended --> "Allowed services" : DIDN'T WORK
5. disabled the firewall again : WLAN ASYNC WORKED AGAIN
6. enabled the firewall and opened "file- and printer-sharing" at the firewall settings ---> WORKED!! YEEHAA

deleted all the new port entries i made before --> only enabled "File- and printer-sharing"!

the solution : "File- and printer-sharing" opens NetBios and UDP port 137! Both is needed for a sucessfull sync over Lan or WLan! NetBios --> makes sense !!!

also look here:
http://www.cewindows.net/faqs/active...p2firewall.htm
or if you speak german ;) :
http://www.worldofppc.com/tutorials/xpsp2.htm

to secure your pc again also look here (bottom): http://www.cewindows.net/faqs/active...p2firewall.htm

i hope i could help somebody - wasn't that easy for me to solve this problem.

gregory

03-15-05, 06:16 PM	#24 (permalink)
would Aximsite Rookie Join Date: Jul 2003 Location: Austria Posts: 26 Thanked 0 Times in 0 Posts	ok guys, i had the same problems. after many many hours of trying i solve this problem. here is what i did: 1. i disabled the windows-firewall for my WLan-connection on my notebook and suddently everything worked fine . 2. enabled the firewall again and opened the system for ports 990,999,5678 and 5679 (AS ports). BUT: DIDN'T WORK 3. disabled the firewall again : WLAN ASYNC WORKED AGAIN 4. tried to open the ports under firewall -> extended --> "Allowed services" : DIDN'T WORK 5. disabled the firewall again : WLAN ASYNC WORKED AGAIN 6. enabled the firewall and opened "file- and printer-sharing" at the firewall settings ---> WORKED!! YEEHAA deleted all the new port entries i made before --> only enabled "File- and printer-sharing"! the solution : "File- and printer-sharing" opens NetBios and UDP port 137! Both is needed for a sucessfull sync over Lan or WLan! NetBios --> makes sense !!! also look here: http://www.cewindows.net/faqs/active...p2firewall.htm or if you speak german ;) : http://www.worldofppc.com/tutorials/xpsp2.htm to secure your pc again also look here (bottom): http://www.cewindows.net/faqs/active...p2firewall.htm i hope i could help somebody - wasn't that easy for me to solve this problem. gregory