Mobility Site - View Single Post

sparhawk · 07-30-05, 01:15 AM

Xeon, I had a very similar issue with my digitizer on my X5. Somewhere in the forums it was suggested that you disassemble your device and clean the edge of your screen. The part behind the frame. Theory is that if dust, sand, whatever has worked its way between the frame and the screen, it causes problems like what you are having.

I did this recently and it appears to totally correct the problem. Just be carefull and be sure to get all the screws there are 6, a couple of clips, and one snap wire connection and you have it. Clean it with a camera lenz cloth or something similar and put the whole mess back together. I can give more detailed instructions if you care to hear them.

07-30-05, 01:15 AM	#4 (permalink)
sparhawk Aximsite Prospect Join Date: Nov 2003 Posts: 1 Thanked 0 Times in 0 Posts	Same issue, I believe fixed. Xeon, I had a very similar issue with my digitizer on my X5. Somewhere in the forums it was suggested that you disassemble your device and clean the edge of your screen. The part behind the frame. Theory is that if dust, sand, whatever has worked its way between the frame and the screen, it causes problems like what you are having. I did this recently and it appears to totally correct the problem. Just be carefull and be sure to get all the screws there are 6, a couple of clips, and one snap wire connection and you have it. Clean it with a camera lenz cloth or something similar and put the whole mess back together. I can give more detailed instructions if you care to hear them.