|
Originally Posted by grcooperjr
|
Well.....
I can tell you that with the 3300ma battery with the cover on, will not fit the cradle. The cover at the bottom is just over 1/4 too wide. So to get it to fit, just trim 3/16 of a inch from each side of the cradle. After that all is fine and it fits like a glove.. Also the battery will not fit in the spare battery charger. So if you want to use this battery, your choices are:
Use a sync cable to charge it
or
Mod the cradle
I chose the latter because it works better for me
Ray C
|
Here are some pics
http://66.14.152.234/ftp/ray/cradle/P7252772.jpg
this one shows the battery in the spare well. Wont fit
http://66.14.152.234/ftp/ray/cradle/P7252773.JPG
this on is of the battery to the cradle area. Just over 1/4 inch too large
Hope this helps
Ray C
__________________
cured palm addict
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Lets go Flying
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|