Mobility Site - View Single Post

apsus · 11-03-05, 05:52 PM

Dell GPS works even better in WM5, I must say. All you need to do is

1. turn on BT. set up a partnership with the receiver. Remember to use "secure" connection and the passkey is 2003
2. add one outgoing serial port and one incoming serial port
3. go to "GPS" settings. choose the incoming port you just set up in the "Progrms" tab; choose the outgoing port you just set up in the "Hardware" tab. leave the "Manager GPS automatically" in "Access" tab checked
4. go to your GPS application, choose the GPS port as the outgoing port you just set up
5. make sure BT is on, restart your GPS application, and you should be able to see the incoming data from the GPS status page

enjoy! :approve:

11-03-05, 05:52 PM	#1 (permalink)
apsus Aximsite Prospect Join Date: Oct 2005 Posts: 17 Thanked 0 Times in 0 Posts	HOWTO: Getting Dell GPS to work with WM5 Dell GPS works even better in WM5, I must say. All you need to do is 1. turn on BT. set up a partnership with the receiver. Remember to use "secure" connection and the passkey is 2003 2. add one outgoing serial port and one incoming serial port 3. go to "GPS" settings. choose the incoming port you just set up in the "Progrms" tab; choose the outgoing port you just set up in the "Hardware" tab. leave the "Manager GPS automatically" in "Access" tab checked 4. go to your GPS application, choose the GPS port as the outgoing port you just set up 5. make sure BT is on, restart your GPS application, and you should be able to see the incoming data from the GPS status page enjoy! :approve: