WARNING - PLEASE DON'T TRY ANY OF THIS AS IT WILL PROBABLY TOAST YOUR AXIM
ok there's some good news and some bad news. I've had an update from Dell and they say
|
Quote:
|
Follow these steps to install
1. Copy the image file (*.nb0) and the corresponding CRC file to one SD card root directory (the SD card must be formated as FAT32).
2. Insert that SD card into PDA
3. Hold "Power" + "Wireless" + "Reset" simultaneously for one second. Release "Reset" and hold the other two buttons until system comes up a screen for SD Update Mode.
4. Use the navigator (Up or Down) to select which image you want to update if more than one valid image existing on the SD card
5. Wait till reflash completes.
Note: If the card cannot be recognized, or no file is found, please re-format the SD card and repeat the above steps.
|
...but of course I dont have these files.
I've only got AximX50v_WM5_A01EN.IMG and no CRC file.
I tried opening the .IMG file to see if it was a container for the necessary files but cant open it with WinISO, PowerISO or UltraISO. I guess it was worth a try.
Attempting the flash procedure with just the .IMG file on an SD card fails although I can get to the flash utility. It just comes up with "no valid file found" or somesuch.
So the question is, does anyone know if the IMG file can be somehow converted to the necessary .nb0 file? I understand that the an .nb0 file is a raw image file of some kind.
Any thoughts?