Mobility Site - View Single Post - Dell Axim and DWL-800AP+

taaqat015 · 06-23-03, 03:24 AM

I contacted D-Link Technical Support and found out the followin to get the AXIM communicating with my DWL-800AP+ Range Extender and my TrueMobile Wireless Card. Mine started communicating after I updated the firmware and disabled 4x Mode on the DWL-614+:

Check your DI-614+ firmware, it should be 2.18 with a March, not a February
date. Once updated to 2.18 on the router, also disable 4x mode (under Advanced
tab->Performance). You probably already know to use the LAN MAC of the router in
the repeater Remote MAC Address field, but this is just a reminder to do that if
you haven't. Also try setting up the repeater without WEP enabled on both the
router and the repeater. You can set up WEP again once you have things working.
Finally, remember to put the router's IP address in the Gateway field on the
Network tab on the repeater.

06-23-03, 03:24 AM	#3 (permalink)
taaqat015 Aximsite Prospect Join Date: Apr 2003 Posts: 2 Thanked 0 Times in 0 Posts	This is what D-LINK Let me know for those having trouble with DWL-800AP+ I contacted D-Link Technical Support and found out the followin to get the AXIM communicating with my DWL-800AP+ Range Extender and my TrueMobile Wireless Card. Mine started communicating after I updated the firmware and disabled 4x Mode on the DWL-614+: Check your DI-614+ firmware, it should be 2.18 with a March, not a February date. Once updated to 2.18 on the router, also disable 4x mode (under Advanced tab->Performance). You probably already know to use the LAN MAC of the router in the repeater Remote MAC Address field, but this is just a reminder to do that if you haven't. Also try setting up the repeater without WEP enabled on both the router and the repeater. You can set up WEP again once you have things working. Finally, remember to put the router's IP address in the Gateway field on the Network tab on the repeater.