Mobility Site - View Single Post

wdroge · 01-20-03, 08:32 PM

thanks to ImARollingStone and BoatRide, I have been able to successfully connect to Verizon Qnc (14.4) and Earthlink Dialup.

Below are the properties I used. You may be able to tweak these properites a little more, however, I know these attributes will work. I tried to format the best I could.

thanks again.

***********
Pocket Pc Dialup Access

1. Dialing Locations (same for Verizon and Earthlink):
Start, settings, connections, dialing locations
Location = Socket Wireless
Tone dialing = check
Country code = 1
Dialing patterns
Local calls = G
Long distance calls = G
International calls = G

2. Verizon Access:
a. Verify that Verizon has changed your account to access mobile
office (14.4)
b. Connections:
Start, settings, connections, internect connections
New (DPC QNC 0115 – name I chose for connection)
Select a modem = Socket HS DPC Card
Baud rate = 19200
Advanced
Port settings
Data bits = 8
Parity = none
Stop bits = 1
Flow control = none
Use terminal before connecting = check
Tcp/ip
Use server assigned ip address = check
Use ip header compression = check
Name servers
Use server-assigned addresses = check
Next
Country code = 1
Area code = 913 (this is the area
code assigned to my phone)
Phone number = #777
Next
Cancel call if not connected within 120 seconds
= check
Extra dial-string modem commands = &C2

3. Earthlink Access:
a. Verify that Verizon has changed your account to access
mobile office (14.4)
b. Connections:
Start, settings, connections, internect connections
New (Std Data Earthlink – name I chose for connection)
Select a modem = Socket HS DPC Card
Baud rate = 19200
Advanced
Port settings
Data bits = 8
Parity = none
Stop bits = 1
Flow control = none
Use terminal before connecting = do NOT
check
Tcp/ip
Use server assigned ip address = check
Use ip header compression = check
Name servers
Use server-assigned addresses = check
Next
Country code = 1
Area code = 913 (this is the area code
assigned to my phone)
Phone number = 6802881 (this is a local
earthlink access number)
Next
Cancel call if not connected within 120
seconds = check
Extra dial-string modem commands = blank
(nothing is keyed in)

01-20-03, 08:32 PM	#3 (permalink)
wdroge Aximsite Prospect Join Date: Dec 2002 Posts: 5 Thanked 0 Times in 0 Posts	thanks to ImARollingStone and BoatRide, I have been able to successfully connect to Verizon Qnc (14.4) and Earthlink Dialup. Below are the properties I used. You may be able to tweak these properites a little more, however, I know these attributes will work. I tried to format the best I could. thanks again. *********** Pocket Pc Dialup Access 1. Dialing Locations (same for Verizon and Earthlink): Start, settings, connections, dialing locations Location = Socket Wireless Tone dialing = check Country code = 1 Dialing patterns Local calls = G Long distance calls = G International calls = G 2. Verizon Access: a. Verify that Verizon has changed your account to access mobile office (14.4) b. Connections: Start, settings, connections, internect connections New (DPC QNC 0115 – name I chose for connection) Select a modem = Socket HS DPC Card Baud rate = 19200 Advanced Port settings Data bits = 8 Parity = none Stop bits = 1 Flow control = none Use terminal before connecting = check Tcp/ip Use server assigned ip address = check Use ip header compression = check Name servers Use server-assigned addresses = check Next Country code = 1 Area code = 913 (this is the area code assigned to my phone) Phone number = #777 Next Cancel call if not connected within 120 seconds = check Extra dial-string modem commands = &C2 3. Earthlink Access: a. Verify that Verizon has changed your account to access mobile office (14.4) b. Connections: Start, settings, connections, internect connections New (Std Data Earthlink – name I chose for connection) Select a modem = Socket HS DPC Card Baud rate = 19200 Advanced Port settings Data bits = 8 Parity = none Stop bits = 1 Flow control = none Use terminal before connecting = do NOT check Tcp/ip Use server assigned ip address = check Use ip header compression = check Name servers Use server-assigned addresses = check Next Country code = 1 Area code = 913 (this is the area code assigned to my phone) Phone number = 6802881 (this is a local earthlink access number) Next Cancel call if not connected within 120 seconds = check Extra dial-string modem commands = blank (nothing is keyed in)