View Single Post
Old 12-09-05, 06:57 PM   #43 (permalink)
HikingEd
Aximsite Prospect
 
Join Date: Nov 2005
Posts: 1
Thanked 0 Times in 0 Posts
Update for Rogers - Canada

I received an email just today from Rogers. After a long struggle to get my Motorola to work the issue came done to one setting..... set the connectionto be to the network and NOT to a modem. Once I made that changed everything worked!!! One issue is you have to subscribe to their data plan and not just for web browsing.
Below are the instruction directly from Rogers. Step ! (where Imarked very important is the key!!!)

Using Motorola V600 as Bluetooth Dial-up modem with PalmOS devices


In order for two Bluetooth devices to communicate with each other, they will have to be paired. Before they could be paired, the Bluetooth Radio will have to be turned ON on both devices:

On the PalmOS: On the Prefs – Bluetooth menu, ensure it displays “Enabled”

On the Motorola V600 phone:

Menu – Settings – Connection – Bluetooth link – Setup – Power, select Edit/Add, set to ON, select “Select

1. Pair the two devices:
- On the Phone, from the Bluetooth link – Setup menu, highlight “Find me”, select “Select”

- On the handheld, from the Bluetooth menu, access “Trusted devices”, select “Add device”.
When prompted, enter the same passkey on both devices.


2. Configuring the PalmOS handheld to use the Motorola V600 as Bluetooth Dial-up modem:

Step 1

Create a new connection on the Handheld:
From the Prefs – Connection menu, select New and configure as follows:
Name: V600
Connect to: Local Network (VERY IMPORTANT)
Via: Bluetooth
Device: Motorola Phone

Step 2
Create a new Network Service:
From the Prefs - Network menu, tap on Preferences in the upper left corner and under Service, select “New”
Configure as follows:

Service: Rogers Wireless
User name: wapuser1
Password: wap
Connection: V600 (the connection created above)

Select “Details” and ensure it displays the following:

Connection type: PPP
Idle timeout: Never
Query DNS: (checked)
IP Address: (checked) Automatic

Select “Script” and enter the following:

Send: at+cgdcont=1,"IP","internet.com"
Send CR:
Send: ATD*99#
Send CR:
End:

Select OK, select OK again and then, select “Connect”


Originally Posted by Gigi
Phone: Motorola V551m

Dialing number: *99#
User name: wapuser1
Password: wap
Domain: internet.com
Extra dial-string modem commands: CGDCONT=1, "IP", "internet.com"


Phone: Sony Ericsson T637

Dialing number: *99##2 (2 is the CID number on phone)
User name: wapuser1
Password: wap
Domain: internet.com
Extra dial-string modem commands: (leave blank)
HikingEd is offline   Reply With Quote