Mobility Site - View Single Post

SolSie · 12-11-05, 04:30 PM

I posted 10 steps for a stress free upgrade from WM2003SE
10 Steps to have a "stress-free" WM5 upgrade. In your case start from step-5.

The below 10-steps are what I'd do if I have a x50/WM2003SE going to WM5. Pretty much all the tips are in the post "WM5 is here to stay.." Link at bottom:

1-Hard-reset
2-Connect to ActiveSync 3.8 as guest
3-Install AS 4.1-I assume there is no problem w/connectivity
4-Perform the WM5 ROM upgrade - direct USB connect/powered
5-When WM5 is up, disable WM5 error notification
6-Install a Registry editor (e.g. Resco Explorer Suite)
7-Apply the registry hack for I/O cache performance and hack for CF disapearing
8-Make sure NO battery meters are active as today plug-in
9-Apply ActiveSync "fake server" hack
10-Install ActiveSync toggle (posted later in this thread)

At this point, take off the cradle, check your CPU in auto-mode to see if the CPU is toggled thru different speeds. If not, just set at max. And perform a backup.

Do not forget to turn on your Axim before putting cradle to avoid "blank screen of death".

You should be good to go!

12-11-05, 04:30 PM	#6 (permalink)
SolSie Aximsite Veteran Join Date: Jan 2005 Posts: 1,498 Device: Samsung A900m Carrier: Sprint Thanked 0 Times in 0 Posts Awards Showcase Total Awards: 1	I posted 10 steps for a stress free upgrade from WM2003SE 10 Steps to have a "stress-free" WM5 upgrade. In your case start from step-5. The below 10-steps are what I'd do if I have a x50/WM2003SE going to WM5. Pretty much all the tips are in the post "WM5 is here to stay.." Link at bottom: 1-Hard-reset 2-Connect to ActiveSync 3.8 as guest 3-Install AS 4.1-I assume there is no problem w/connectivity 4-Perform the WM5 ROM upgrade - direct USB connect/powered 5-When WM5 is up, disable WM5 error notification 6-Install a Registry editor (e.g. Resco Explorer Suite) 7-Apply the registry hack for I/O cache performance and hack for CF disapearing 8-Make sure NO battery meters are active as today plug-in 9-Apply ActiveSync "fake server" hack 10-Install ActiveSync toggle (posted later in this thread) At this point, take off the cradle, check your CPU in auto-mode to see if the CPU is toggled thru different speeds. If not, just set at max. And perform a backup. Do not forget to turn on your Axim before putting cradle to avoid "blank screen of death". You should be good to go! __________________ The Lighter Side of Mobile Technology To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. X51V To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Latest News, Tips, Skins, Podcasts, Videos,..Visit To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.