It seems that there is a common problem with PocketPC 2003 and the HP48 emulator. I've heard others mention the problem but haven't seen any solutons. The GNU licence screen shows for a fraction fo a second and then the program (apparently) exits. Has anyone gotten Leo Castillo's EMU48 to work on their Axim with 2003?

If not, I'll email Leo directly, but I wanted to find out if there's a simple fix that I don't know about (Axim newbie).

Thanks,
OZT

i have exactly the same problem with my hp2215 and wm 2003
so the problem is in the compatibility with hp48 and wm 2003
something that i cant understand is why dont work under wm 2003 and yes it does unde3r pocket pc 2002, it is not fear, i already emailed to leo.

I have exactly the same problem, so I searched the net looking for answers. It came in German language. I will post it even thogh I don't understand a word of it. Probably someone can help !!!

Hallo,

Nach einigem Herumprobieren mit dem GNU-Quellcode von Emu48 scheint das Problem gelöst.

Das Problem liegt offenbar darin, dass die Registry durch das Programm selbst initial beschrieben und sofort wieder ausgelesen wird - aber die Einträg noch nicht verfügbar sind, worauf sich das Programm beendet (Timing-Problem bei schnellen Prozessoren?). Man muss die Registry mit einem Registry-Editor manuell erweitern. Folgendes muss eingetragen werden (Dump von PHM Registry Editor):

[HKEY_CURRENT_USER\Software\Emu48]

[HKEY_CURRENT_USER\Software\Emu48\Serial]
"Ir"=""
"Wire"=""

[HKEY_CURRENT_USER\Software\Emu48\Emulator]
"GXCycles"=dword:0000007b
"SXCycles"=dword:00000052
"RealSpeed"=dword:00000000

[HKEY_CURRENT_USER\Software\Emu48\KML]
"AlwaysDisplayLog"=dword:00000001

[HKEY_CURRENT_USER\Software\Emu48\Port2]
"Filename"=""
"IsShared"=dword:00000000

[HKEY_CURRENT_USER\Software\Emu48\Files]
"Delay"=dword:00000001
"AutoSaveOnExit"=dword:00000001
"AutoSave"=dword:00000000
"Emu48Directory"="\\Programme\\Emu48"

Anchließend funktioniert der Emulator auch auf X-Scale/PPC 2003 tadellos.

BitRanger

i dont know german, but i think u just need to edit the register entry and remplase the entries with those that u posted

Ok guys this solution actualy works.

I can work now with the emulator in PPC 2003 !!

Hmmmm, I though I replied to this thread with a positive report a while back, but I don't see it here.

Anyway, it does work, though the exact data entries have to match your locality (program files vs programme).

Another question: Is it typical to have the application run veeeerrrrrry slooooooooowwwwwly for key presses? I guess I expected response times closer to the keyboard, or at least the built in calculator. (I'm using a 300MHz X5, but nothing else is running).

Has anyone gotten better response and, if so, did you fiddle with any settings to make it work?

I have been having the same problem. I have an AXIM X30 2003 Second edition V 4.21.1088(Build 14260.2.0.2) Processor PXA270 (Xscale I believe).

I have tried every version I could get my hands on but keep going back to my HP48G. Could point me to the latest version that is supposed to correct this issue? The one of Leo's didn't work the last time I tried it.


Thanks for you efforts.

Try this one, working fine on an Ipaq 5555 and on an x51v.

http://www.hpcalc.org/details.php?id=6120

 

I am getting a little farther into execution and can select which kml file. Regardless of which kml file it doesn't load completely.

SimpleGx, Leo 48gx, PPCHorizontal48 error opening keyboard file - fatal error line XXX

Leo 48Gx v. ii indicates it can't load ROM.49G.

Any ideas?

[QUOTE=Ken S]Try this one, working fine on an Ipaq 5555 and on an x51v.

http://www.hpcalc.org/details.php?id=6120[/QUO

Do you have Roms loaded on your PPC, you need a rom image of the calculator to emulate it. You can download Rom images at hpcalc.org

 

I was able to get the PC version working (Graphing didn't seem to work though) using the convert gx...rom ROM.48g.

I tried just placing the gxver.rom into directory without luck and after I got the PC version working I copied ROM.48g to PPC. PPC seems to be expecting ROM.49g - didn't seem to matter if I renamed it to ROM.48g either.

Do you have to load the WM2003 ROMs differently from PC version?

Sounds like the kml file you are loading is to emulate a hp49, not an hp48. Remember that this software can emulate an hp39, hp40, all the different hp48's (S, SX, G & GX) and the hp49. If you are loading an hp49 kml you will need an hp49 rom for it to work. You can download one at hpcalc.org

 

Do this right and your emu48ppc will run smoothly (no more crashing):
Go to Christoph Gießelink´s page
http://privat.swol.de/ChristophGiesselink/emu48.htm
and download E48MB105 (replacement for our old pal Emu48CE).
There you´ll find an explanation (in English) on how to patch old KML files. I personally downloaded Wombat3 which has a VGA version.

Hardware:
Axim x50v
Delorme Bluelogger GPS + Vito SmartMap
Lexar 1GB SD + Kingston 1GB CompactFlash

Thanks for the tip, I was already using 105 with Wombat 3, but that screwed up all my other kml files displays. The patched kml files are only for VGA devices correct?

 

Nop, kml files were originally made for emu48ce (crashing in wm2003), thats why they dont run with emu48ppc (which doesnt crash in wm2003). Therefore you need to modify kml to run with emu48ppc.
The bmp file can be vga or qvga, it just needs to be well routed.
We use wombat3 because with it we dont need to do all that reading, we just load its kml with its bmp and its done.
Here´s a shot of emu48ppc with a qvga frame.

Hardware:
Axim x50v
Delorme Bluelogger GPS + Vito SmartMap
Lexar 1GB SD + Kingston 1GB CompactFlash