Davidod

Hi Folks
I have been trying to connect my recently acquired Bluetooth Satellite Receiver with my Ipaq 1940. This is running Pocket PC 2003 with Pro Bluetooth Manager Ver 1.4.1 Build 60.

I have paired the device and made a connection however Bluetooth Manager Status is showing no Activity going either way - the device is shown as BT GPS. From Bluetooth Settings I notice that the Inbound COM Port is 5 and the Outbound COM Port is 8.

If I run PocketStreets and look at Configure Receiver I see that it is looking at Com Port 5 for a response, and on the map the message states that 'The COM Port is available but no signal is being received'. HOWEVER on three or four a full connection was made and all worked perfectly, but break that connection and try again - no joy.

I have Autoroute on my PC and everything works fine everytime I make a connection with my PC.

Has anybody got any suggestions as to how I could resolve this dilemma? Many thanks for any help received.

Many thanks for any help received.
Dave

ecu_reader

If your outbound is COM 8, why not try that? The inbound is for when a device wants to communicate with your Bluetooth serial port service. As you are the client and the GPS is the serial port service provider, I think you should be using COM8. HTH