works ok for me. i have trouble with the keymappings and memcards though. i expect if i copy a memcard from my pc it will work. i usually get ~70 fps
if any one can suggest a good screen capture utility i can post a screen shot.
anyway:
download (
http://www.fpsece.net/download/FpseC...2003_armv5.zip)
the xscale version for windose mobile 2003
unzip it to a directory on your pc.
put your bios image in the bios folder i use scph1001.bin but scph7502.bin would probabily work.
if you have some from a pc emulator put memcards in the memcard folder
next you need an iso of a playstation disc. i used spyro the dragon. see
http://pdai.org/~dk/guide/ldrguide.htm for a tutorial . i find that if you use Z compression (not BZ) you get much better frame rates and only loose a couple megabytes. you need to put any files output by pocketiso into the isos directory of the emulator.
to review:
the unzipped emulator should be in a folder called FpseCE (i dont know if the name matters)
you should have put your iso in the isos folder
memcards in the memcard folder
and a bios in the bios folder
now you can copy the whole thing to a sd card. just open up active sync with your axim on the cradle and click explore. then copy the Fpsece directory onto the storage card.
when it finishes find the fpsece exe in file explorer and run it
(on the axim)
go to options->bios->choose bios and tap the bios image you want to use
set usa under options->country
set options->cpu mode to recompiler
goto options->joypad->assign buttons then tap each button on the screen and press the button you want to use on the axim
under options->misc select fps counter, fast boot, frameskip. set the display to landscape (whichever you prefer)
under options->sound i checked enable xa play but i havent yet heard any sound if your fps is low you could disable that.
goto config and save
tap quit and do a soft reset
restart fpsece from the file browser and goto start->start iso and tap your iso file.
good luck and i will do my best to get a screenshot