bibliophile90

Hi friends, I have Dell Axim 51v. I could not run TomTom6 navigator with Oncourse BT GPS reciever. I did everything given in the set up manuals, but Oncourse does not connect with my axim. I appreciate your help

joekee

Originally Posted by bibliophile90

Hi friends, I have Dell Axim 51v. I could not run TomTom6 navigator with Oncourse BT GPS reciever. I did everything given in the set up manuals, but Oncourse does not connect with my axim. I appreciate your help

First, please DELETE all pairing you have already established and follow the step-by-step instruction below. In step 8, please use COM 7 as your outgoing COM Port number.

Part 1: How to configure a Bluetooth GPS Receivers with Windows Mobile 5 devices?

Part 2: Configure TomTom GPS setting.
- Launch TomTom Navigator


- Choose Agree

- Tap on screen to bring up options


- Choose Change preferences

- Tab over several screen until you see show GPS Status

- Then choose Configure



On this screen, make sure the picture shows Other Bluetooth GPS/TomTom Wireless GPS. If it doesn't, you can use the arrows on either side of the picture to browse through the selections.



Once Other Bluetooth GPS/TomTom Wireless GPS is shown, choose select and this will bring you back to the GPS Status screen. On the top left there may be some small black text that may say No GPS Device! or No Valid GPS Signal.



If it says No Valid GPS Signal the GPS Receiver and PDA are communicating properly and both will need to be placed outside temporary to have access to a clear sky view in order to get a GPS Signal.

__________________
Best Regards,
Sales Team at buyGPSnow.com

bibliophile90

Hey thanks for the reply. Know what, I tried this before reading your post and it worked.

Originally Posted by joekee

First, please DELETE all pairing you have already established and follow the step-by-step instruction below. In step 8, please use COM 7 as your outgoing COM Port number. Part 1: How to configure a Bluetooth GPS Receivers with Windows Mobile 5 devices? Part 2: Configure TomTom GPS setting. - Launch TomTom Navigator - Choose Agree - Tap on screen to bring up options - Choose Change preferences - Tab over several screen until you see show GPS Status - Then choose Configure On this screen, make sure the picture shows Other Bluetooth GPS/TomTom Wireless GPS. If it doesn't, you can use the arrows on either side of the picture to browse through the selections. Once Other Bluetooth GPS/TomTom Wireless GPS is shown, choose select and this will bring you back to the GPS Status screen. On the top left there may be some small black text that may say No GPS Device! or No Valid GPS Signal. If it says No Valid GPS Signal the GPS Receiver and PDA are communicating properly and both will need to be placed outside temporary to have access to a clear sky view in order to get a GPS Signal.