hnelson59

One of our members, Jukov, had this to say about Card Export II for PPC:
"Please, inform others on the frontpage about the cardExportII for PPC it is truely a groundbreaking utility for PPC."

From the SOFTICK web site:
Accessing a storage card has never been easier!

• Softick Card Export II PPC Switch USB mode from Active Sync to Card Export
• Insert your Pocket PC into cradle or connect to USB cable
• And after few seconds desktop drivers automatically mount cards as a logical disk!

You can check out Card Export II here.

__________________
Harold Nelson, USN, ETC(SS), retired
"Be ashamed to die until you have won some victory for humanity." - Horace Mann :approve:

"Life is not measured by the number of breaths we take, but by the moments that take our breath away" - George Carlin

forkyfork

It sounds completely awesome.

The only problem is I can't seem to get it to work. Am I doing something wrong?

transcout

Is it faster than just using activesync?

WermerSkoch

This sounds wonderful! Does anyone know if it will work with my x50v?

transcout

I have bent pins so I can't test it on x30 :/

aximbigfan

i get an error message "cant locate your USB driver".
but i am using the public beta.





chris

CRXGSR

Here's the thread which discusses this program further.

http://www.aximsite.com/boards/showthread.php?t=74033

__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

forkyfork

Nevermind. I figured it out.

This is very cool.

Too bad it can't work WITH activesync :(

Jukov

Quick Review.
Works awsome. Recognizes SD, CF and BIS. Just like having a card reader installed into your Ax.
File transfer is faster then AS but not as fast as a hi-end card reader. Able to work w/ the cards w/o AS installed on the PC as another removeble hard drive.
Example: Able to connect to my PC and listen to all my music list thru the 7 - way speaker system . Yum!

How to install:
1. Download the trial
2. Install it to your Ax.
3. Remove it from cradle and perform Soft Reset.
4. Now at the right bottom corner of the screen you will see a new icon - press it.
5. Go to Preferences... and select your number of cards including BIS, ex.: I have SD CF and BIS, so my # is 3 .
6. Press OK
7. Press the programs icon again and choose CardExport mode.
8. ONLY NOW connect to cradle.
9. Go to My Computer to work with your new removable HD's

note: everytime you want to change mode from CardExport to ActiveSync and back you need to disconnect your Ax from the PC, i.e. remove the Ax from the cradle

hnelson59

installed to main memory on my X50v and it seems to work fine. now i need to buy a usb connector to go from handheld to computer! :)

__________________
Harold Nelson, USN, ETC(SS), retired
"Be ashamed to die until you have won some victory for humanity." - Horace Mann :approve:

"Life is not measured by the number of breaths we take, but by the moments that take our breath away" - George Carlin

Jukov

You can also safely install it to BIS and thank you for responding to my PIM.

msprague

I just ordered this and a sync/charge cord from pocketpctechs to go with it. I'm a happy camper!

Link to order Card Export II for Pocket PC:
https://www.regnow.com/softsell/nph-...gi?item=8834-7

__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Want to move to West-Michigan?

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

gjw

Originally Posted by forkyfork

Too bad it can't work WITH activesync :(

It can work with WiFi ActiveSync.

forkyfork

Originally Posted by gjw

It can work with WiFi ActiveSync.

Ooooh really. This I have to try.

If so, that's perfect!

chihiro

Axim X50 Intel PXA27x Works fine
Axim X50V Intel PXA27x Works fine
Axim X30 Intel PXA27x Doesn't work yet