DaLabrador

Originally Posted by Muad`Dib

Odyssey is showing a "strong" signal (-50 db). When I am not using Odyssey, I am getting 4 full green bars and the "The page cannot be found..." message EXCEPT when I connect to 192.168.1.1

Did you try this yet?

Miniscule howto:
* Go to Start-settings-connections
* Click Network Cards
* Choose your WLAN wireless Adapter and click Edit
* Choose the Name servers tab and change DNS to 192.168.1.1 (or what your router get from your ISP).

Also: Does the router work with other computers?

__________________

1. Be Kind.
2. Have fun.

Muad`Dib

Originally Posted by DaLabrador

Did you try this yet? Miniscule howto: * Go to Start-settings-connections * Click Network Cards * Choose your WLAN wireless Adapter and click Edit * Choose the Name servers tab and change DNS to 192.168.1.1 (or what your router get from your ISP). Also: Does the router work with other computers?

Just tried it. good strong green bars and the "The page connot be found." message. I seem to be able to connect with the router, just can access the internet via the wireless. I know it must be something very simple I am over looking ....
Thanks though. And if you have any other suggestions, I am all ears. I have been working on this problem for hours on end now. :(
W Dale

ikehiker

I just posted this in another thread with what appears to be the same problem. I suggest you try the same:

Originally Posted by ikehiker

Have you checked the Linksys site for new firmware? If they have any, try installing it, if there is none, I suggest you reset the router, go into it's setting and change the SSID (to something different from what you used before) and change it to B only. Do not enable any security and try to connect the Axim.

__________________
-Ike-

jhom

I have the wrt54g and x51v. They are talking to each other fine. Have you tried pinging your router or the ax?

ricjaywhit

I have the same router and axim - try using WEP - worked for me.

Rich

Muad`Dib

Originally Posted by jhom

I have the wrt54g and x51v. They are talking to each other fine. Have you tried pinging your router or the ax?

I will give that a try. This morning I did a reset to factory defaults on the site and then did a rest on my router, removed all the network connections from my Axim, going to let the router sit for a few minutes then, start all over.

Muad`Dib

Originally Posted by ricjaywhit

I have the same router and axim - try using WEP - worked for me. Rich

Hi Rich,
Can you 'walk' me through your set up? I am using a Intel 2200 internal DSL modem which "tech support" at my ISP says I should upgrade to an external modem such as the Actiontec offered by Qwest or something similar. I do not understand how I can connect to my ISP via DSL, surf and do what ever else I need to do, and not connect via wireless (Page cannot be found message all the time now) simply because of the modem. Any suggestions or insights? Would be most appreciated.

This morning I did a reset to factory defaults on the site and then did a rest on my router, removed all the network connections from my Axim, going to let the router sit for a few minutes then, start all over.

Thanks for your help.
W. Dale

Muad`Dib

Originally Posted by ikehiker

I just posted this in another thread with what appears to be the same problem. I suggest you try the same:

Will do and let you know.
THANKS!

This morning I did a reset to factory defaults on the site and then did a rest on my router, removed all the network connections from my Axim, going to let the router sit for a few minutes then, start all over.

W. Dale

Muad`Dib

Ok, I am able to connect, renew IP addy and receive reply to pinging. However, whenever I try to load a web page, says web page cannot be found and the other PC I have on wireless IE says it cannot load page. Strange.

nomadmatt

did you set it connect to the internet instead of work? that would prevent you form going online to the web

__________________
Sj-30->X30h->X50V->AT&T Tilt

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.