Y2Dre

Originally Posted by betocchi

My x50v can exchange files with a Samsung e730 cell phono, using OBEX file transfer protocol, but it can only receive files from a Benq Siemens EF81 phone; when it comes to sending files the line "Send via Bluetooth" disappears . When sending contacts or appointments, everything goes smoothly either way. The x50v can pair the EF81, but only shows the following protocols: Dialup ans Serial. Any clue to implement OBEX for the EF81 or any other way to send files from the Axim to the EF81?

I have the same problem...however my phone of choice is the Motorola i880 from Nextel. I can send audio/pics from my phone to my x50v but not the other way around. I also only get Dial-up Networking or Serial as choices when I pair the phone to the x50v.

Any help would be appreciated.

Fiver

Originally Posted by photokaki

the axin 51v, does it have the audio gateway? i have paired my bt headset, but no sound coming thru

This seems to be my problem too.
My symptoms which I emailed to Motorola:
I am trying to use the HS 805 headset with my Dell Axim x51v. The Axim sees the HS805 when pairing, but then the "Choose Service" field is totally empty so there is no service to select and so the connection is established and no icon for Headset is there. Are the two compatible? Do I need a "driver" of some sort?

The Bluetooth Guide directions do not look anything like the display on my PDA. Do I need a "patch" as was mentioned in this thread?

dvmed

Originally Posted by Fiver

The Bluetooth Guide directions do not look anything like the display on my PDA. Do I need a "patch" as was mentioned in this thread?

Yes. The MS stack doesn't support handsfree or headset profiles.
http://www.aximsite.com/boards/showthread.php?t=122247

Install widcomm and find out about the crap Dell put in the X51 series.

HardyHar

If anyone is interested in knowing, I just found a software program that works w/ Bluetooth, its called Dragon Naturally Speaking--a voice recognition program. I was stoked to see its Bluetooth compatible.

Anyway, thanks for the link to the guide!

Fiver

Originally Posted by dvmed

Yes. The MS stack doesn't support handsfree or headset profiles. http://www.aximsite.com/boards/showthread.php?t=122247 Install widcomm and find out about the crap Dell put in the X51 series.

Thank you for the info. The above thread contains ALOT of info and different links. Would you mind directing me in more detail what I need to do and what downloads and versions I need? Sorry, but this BT stuff is all new to me.

radimus

Originally Posted by radimus

Is there a way to make it automatically sync with the BT enabled PC upon detection/entering BT range. It will sync if I manually select it from the PPC's Activesync app. like what this app does http://psychoman.co.uk/forum/

Found it:

http://www.vijay555.com/index.php?Releases:VJBlueSync

Now to set it up in a task scheduler to sync every hour and victory is mine...

__________________

Quote:

"Always vote for principle, though you may vote alone, and you may cherish the sweetest reflection that your vote is never lost." -- John Quincy Adams

My Articles and My News

Software Discounts for MobilitySite members and Aximsite Store

How to Ask Questions the Smart Way and Before you Ask

Fiver

Originally Posted by Fiver

Thank you for the info. The above thread contains ALOT of info and different links. Would you mind directing me in more detail what I need to do and what downloads and versions I need? Sorry, but this BT stuff is all new to me.

Iinstalled v05, and it worked for my headset. Thanks!

serguti

Hi there, I have a minor problem with BT, When I go to Contacts and select one, then MENU, it show Dial "Dial via BT" twice on the menu..... I try to uninstall and re install the BT software and keep showing this menu 2 times....any answer ?...
Regards

Lawman1965

Has anyone done a tutorial for bluetooth with Windows Mobile 5? I've tried to follow the one shown in the OP's link at the start of this post but am really struggling. I have a Dell Inspiron 9400 and you'd think that the two would match nicely....big laugh.

I simply cannot get my X51 to connect via active sync to my notebook using Bluetooth - USB is fine but I want the bluetooth connectivity too.

Rich

radimus

Go to the laptops BT control panel and have it setup a comport - incoming

in Activesync, check Allow Connections on COMx, where X is the same port you created in BT panel above

On PDA, start ActiveSync, connect via bluetooth

I have it setup to sync between home and work PCs...

See MyPDA for helpful utility VJBlueSync

__________________

Quote:

"Always vote for principle, though you may vote alone, and you may cherish the sweetest reflection that your vote is never lost." -- John Quincy Adams

My Articles and My News

Software Discounts for MobilitySite members and Aximsite Store

How to Ask Questions the Smart Way and Before you Ask

cal0613

Hi to All,

I have an x50v Axim (A02, 2003se) and a Bluetooth BT-339. My problem is this I have Iguidance and TomTom5.0 and every time I must first turn on GPS , then select it from my BT manager, then exit to desktop – then start up my GPS software. Is there no way I can simply turn on my gps –then start my gps software (iguidance or Tomtom ) and have the program hook up to my BT 339 all by itself ?? This is the only BT device I have and it seems even if I try to select it as default EVERY time I start up I must go through this same procedure. Can anyone shed any light on what I must do to get automatic startup of the BT device whenever I start the software? Any upgrades needed? X51v ? WM5? Whatever?

Thanks for any help/advice !!

Lawman1965

Originally Posted by radimus

Go to the laptops BT control panel and have it setup a comport - incoming in Activesync, check Allow Connections on COMx, where X is the same port you created in BT panel above On PDA, start ActiveSync, connect via bluetooth I have it setup to sync between home and work PCs... See MyPDA for helpful utility VJBlueSync

I simply can't get the thing to work - each time I set up the com port I can't set iot to (or don't have an option for) incoming.

Then when I go to Activesync on my PDA it just says that there is no Partnership with a PC that has activesync - which is rubbish as I have set the partnership between my PC and my PDA. Windows Mobile is really bad.

Rich

radimus

Originally Posted by Lawman1965

I simply can't get the thing to work - each time I set up the com port I can't set iot to (or don't have an option for) incoming.

if you can't get the port setup on the laptop first, how do you expect to get the second part to work... especially as the port is necessary to communicate?

Fix the laptop BT first

then worry about activesync

then worry about the pda

__________________

Quote:

"Always vote for principle, though you may vote alone, and you may cherish the sweetest reflection that your vote is never lost." -- John Quincy Adams

My Articles and My News

Software Discounts for MobilitySite members and Aximsite Store

How to Ask Questions the Smart Way and Before you Ask

CapeBob