Tony209

I have an Ipaq 2110 and I'm trying to connect to an Orange Livebox D3B0. The wireless card has detected the Livebox, as it shows up on the site survey with a signal strength. When I try to open an internet browser, I get the error message 'Cannot connect with current connection setting'. When I try to change the settings, only a modem and dial-up settings can be entered.

When my ipaq is linked to my laptop the internt works fine and the Livebox shows up as 'connected' but as soon as I disconnect the link, the livebox shows as 'available'

Ipaq 2110
Windows Mobile 2003SE
Pluscom 11b SDIO card
Orange Livebox D3B0

ikehiker

In the network settings - Start, Settings, Connections (tab), Connections, Advanced (tab), Select Networks and select "My Work Network" from both of the pull down lists. If you then tap the Edit... button under either list and the Proxy Settings (tab), the top box (This network connects to the Internet) should be checked but leave everything else on this page blank. After tapping OK, make sure both dropdown lists are still set to My Work Network and OK your way back to the Today page and then soft reset.

__________________
-Ike-

Tony209

Originally Posted by ikehiker

In the network settings - Start, Settings, Connections (tab), Connections, Advanced (tab), Select Networks and select "My Work Network" from both of the pull down lists. If you then tap the Edit... button under either list and the Proxy Settings (tab), the top box (This network connects to the Internet) should be checked but leave everything else on this page blank. After tapping OK, make sure both dropdown lists are still set to My Work Network and OK your way back to the Today page and then soft reset.

Thanks for the quick responce, tried that but no joy I'm afraid

ikehiker

That's the only solution I remember for that error message but you might check through the WiFi Guide for more possibilities, especially the Check these first section.

__________________
-Ike-