Official GPRS Settings Thread

[kemet]

Mobile = Sony Ericsson k700i
X51 mid
Bluetooth paired with an outgoing port open(7 for me, 8 is used by activsync)

number is *99#
User = orange
pass = orange
domain -> blank

baudrate 57600 (havent tried faster but but it should work)
wait for dial tone is checked

+cgdcont=5,"IP","orange.fr"

all the rest is default

hope it helps.

[Razr]

YAY!!!!!! THANK YOU SO MUCH FOR THIS THREAD!!!!!! OHMIGOD! I FINALLY GOT MY DELL AXIM X51 TO CONNECT TO THE INTERNET THROUGH MY MOTOROLA RAZR V3 T-MOBILE CELL PHONE!!!

HERE'S HOW:

1) CONNECT THE CELL PHONE AND AXIM VIA BLUETOOTH.
2) ON AXIM, GO TO:
SETTINGS > CONNECTIONS > CONNECTIONS > ADD A NEW MODEM CONNECTION
3) ENTER IN FOLLOWING DATA:
Enter Name for the connection: (Pick anything you want)
Select a Modem: Bluetooth
4) Select your phone as the bluetooth device. (Tap NEXT)
5) Enter the number to dial as: *99#
6) Leave User Name, Password, and Domain all blank.
7) Tap Advanced.
8) Baud rate: 19200
Wait for dial tone before dialing: OFF
Extra dial-string modem commands: +CGDCONT=1, "IP", "internet2.voicestream.com"
9) Tap OK.
10) Click FINISH.
11) Test it by going to MANAGE EXISTING CONNECTIONS.
12) Tap and hold over the connection you just created (whatever name you gave it).
13) Choose CONNECT.
14) Leave all fields blank, and tap OK.
15) It will dial, and your phone will turn on while it dials.
16) You will be connected when there's no error message. A box will appear in the upper left corner of the Razr and the screen will tell you: "GPRS ACTIVE".

WELL DONE!!!

IT'S CONNECTED AND YOU CAN NOW SURF THE NET WITH YOUR AXIM!!!


:approve:

[deeznutz]

Cingular USA

--------------------------------------------------------------------------------

Phone: Motorola V551

Dialing number: *99***1#
User name: WAP@CINGULARGPRS.COM
Password: CINGULAR1
Domain: (leave blank)
Extra dial-string modem commands: +CGDCONT=1, "IP", "WAP.CINGULAR"

http://www.aximsite.com/boards/showthread.php?t=76500

See http://www.aximsite.com/boards/showthread.php?t=75661 for Cingular USA data plan info

Help please. Can't get it working.

At&t / Cingular USA
SE S700i

I've tried the above settings and also tried *99# as the Dialing Number and Username as ISP@CINGULARPGS.COM but it doesn't work either.

What is this "extra dialing string modem command and do I need them? If so, where do I go to input them?

Note: I do not have a data plan yet so is that why it won't work?

[Menneisyys]

Help please. Can't get it working.

At&t / Cingular USA
SE S700i

I've tried the above settings and also tried *99# as the Dialing Number and Username as ISP@CINGULARPGS.COM but it doesn't work either.

What is this "extra dialing string modem command and do I need them? If so, where do I go to input them?

Note: I do not have a data plan yet so is that why it won't work?

With the S-E *700* phones, in general, you must pass a single Z (a simple reset command) to the phone from the init string.

(Also see my article on all these questions at http://pocketpcmag.com/forum/topic.asp?TOPIC_ID=17837 )

[max1o]

Settings for gprs internet with nokia 6230i and o2 UK contract.
I've received gprs settings from o2 to my mobile by text message and set Axim:
Phone number: *99#
Username: o2wap
Password: password

Before pressing Finish
You need to press on the 'Advanced' button to change some settings:
Untick "Wait for dial tone"
Add the following string to the extra dial-string commands:
+CGDCONT =1,"IP","MOBILE.O2.CO.UK"

[Trig0r]

Hmmm, I'm going wrong somewhere, I cant get my 51v to connect via my k750i, I'm on o2 and have tried both the password/usernames that are in this thread but no joy..

[kc_2184]

i have the old at&t network and i cant seem to find the infor for a gprs connection to my wm5 x50v. all i see is for cingular. these settings do not work. i have a v500 phone.

[pete44]

Anyone know the strings for Telus. am using Motorola Razor Amin 51 and using aol dial up

[Foci_x50v]

nned the settings for a samsung z320i using imode internet not wap.

[Foci_x50v]

found out that you cant use you mobile as a modem to connect your pda to the net if you have a pay and go sim it can only be done on a contract so never mind.

[unitedxempire]

I have a Motorola Razr V3, T-mobile, and my Axim X50v

I do not have the internet option yet. I *do* have the T-zones option.

When connecting using settings as described above, I can check email, but not browse. Likely because browsing is blocked until you fork over the extra $30/month, but they could care less about your email.

I don't need to put in a username, password, or domain.

I don't need to put in any extra dial-string modem commands. If I do put any in, it makes no difference for me. Nothing additional starts working and nothing stops working.

After connecting to the phone and dialing #99*, I'm able to check my mail from anywhere.

Which e-mail are you talking about. I have RAZR V3 and Axim X51v and I did the same but couldn't browse. But I will be happy with my e-mail for free. I don't have the T-Zones option though.

[aliensing]

M1, Singapore

Phone: Nokia 6111

Dialling number: *99#
Username: - (leave blank)
Password: - (leave blank)
Domain: - (leave blank)

[mseidler]

How about for SPRINT PCS - what is the correct way to connect? Thanks.

[MrJazzy]

Anyone ever get a Axim X50v working with a Motorola V3 using O2 payandgo
I had the 02 payandgo working in my Audiovox RTM8000 as a GPRS modem, but I can't figure out what extra dial strings to use for the bluetooth dialup modem..
The PDA connects and *99# switches it into GPRS active but I can't get any pages back...
I have tried +CGDCONT =1,"IP","PAYANDGO.O2.CO.UK" but this does not seem to work

Please help

[JohnWtx]

Cingular USA

--------------------------------------------------------------------------------

Phone: Motorola MPx220

Dialing number: *99***1#
User name: WAP@CINGULARGPRS.COM
Password: CINGULAR1
Domain: (leave blank)
Extra dial-string modem commands: +CGDCONT=1, "IP", "WAP.CINGULAR"

Cingular Multimedia data plan
Same general settings found in GPRS data connection in MPx220