Cannot get DHCP address

laxman · 03-01-04, 03:13 PM

I have an X5 w/TM1180 and it was working now it isn't. I know the 2 APs are working, cause the laptop works. I go from home to work and can connect to the AP, but won't get anything other than a 169.... address. When I connect w/cradle it works. I tried releasing and renewing w/ceipconfig. Doesn't help. Any other things I can try to get it to work? My co-workers works, another X5 w/MM2003. Thanks

Mike

laxman · 03-04-04, 10:04 AM

Update. I have a Dlink AP900+(802.11b) and a AP2000(802.11g) and when I connect to the 900 everything is ok. With the 2000 I get a to connect to the AP but I can't use a static or DHCP, it won't let it go through. I am going to try taking the WEP off, but could this be a MM2003 problem or a TM1180 and AP2000 problem? Thanks

Mike

ikehiker · 03-04-04, 04:52 PM

Is the AP2000 set for mixed mode? The TM card will only be able to connect to 802.11b networks and if the AP is set to G only, it won’t work.

laxman · 03-05-04, 02:42 PM

Nope, the 11g only mode is disabled. This only happened after going to 2003 from 2002.