|
Originally Posted by acf01
|
I just received an 1100 and 2000 mah mugen battery today. I have the 2000 in the charger right now and the light it on but it feels loose, the one side keeps bouncing up. And when I tried to put the 1100 in it wouldn't stay at all.. the one side just kept bouncing up. What should I do? 
|
Here's how to charge both. The 1100mAh battery is about 1mm thicker than Dell's 950mAh battery. So the charger is a bit tight. Place the 1100mAh battery into the spare charging slot in the cradle. Press it down and lean it forward slightly. The orange light will go on. Leave it in there for 12 hours if this is the first time you're charging it. After that, when the light goes green, you're good to go.
Now for the 2000mAh battery. It to is a little loose. You may have to press it down also. You will feel it click slightly. Again, leave it on for 12 hours if it is the first time you're charging it.
You only have one spare slot in the cradle so put the 2000mAh in the cradle and the 1100mAh in the Axim. Then place the Axim in the cradle and you're charging both batteries at the same time.
If you have more questions or comments, let me know.
MEF38
