|
The X3 does not have WiFi (only the X3i did), so first you need to buy an sdio WiFi card with drivers for WM03.
Once the drivers are installed (usually through an activesync connection), insert the card (and turn it on of the software has that option - most accessory cards turn on automatically when inserted).
You should get a notification that a network was found. Chose 'Work' as the type of network. Enter the WEP key when asked (AFAIK, WPA is not an option with WM03).
If you get an 'unable to connect' error, try going into the network settings - Start, Settings, Connections (tab), Connections, Set up my Proxy server. On the Proxy server tab, check the top box (This network connects to the Internet) but leave everything else on this page blank. On the General tab, the name should be "My Work Network." OK and then select the Advanced (tab), Select Networks and select "My Work Network" from both of the pull down lists. That should allow you to use work for both networking and the Internet.
|