PsiStar

The PXBus running at 199 MHz will help the performance of mapping s/w also. Especially help the performance at turns for the s/w that zooms in with voice ennuciation.

TheAce

Something weird that I noticed after extended testing with 472/236 on my Advanced: sometimes, the Axim would "lose" the stylus, although it was still touching the screen. This made drag-n-dropping very iffy, and sometimes downright difficult, because I would "lose" the object I was draggin while in midcourse......

Anyone else noticed that ?

__________________
Axim Advanced 400MHz PPC2003
Krusell Leather Case
256MB SD, 256MB CF, NSC BlueTooth CF, AmbiCom GPS CF

krock

Yeah. I had trouble with touching the stylus at one place and it doing something other than what I wanted. Almost like it had bad tracking of the stylus touch points. But I kept my Basic around 300Mhz and sometimes 400...but only tried it twice at 472 for less than a minute.

jaydee

Someone please explain how to set the bus speed to 200 on a PXA 255 Processor? Do I have to pay for and downlaod Hackmaster in order to do it?


Many Thanks

TheAce

Quote:

Originally posted by jaydee Someone please explain how to set the bus speed to 200 on a PXA 255 Processor? Do I have to pay for and downlaod Hackmaster in order to do it? Many Thanks

Yep, you have to buy one of the programs mentioned in this thread.......unless you are a decent programmer, in which case you can try to program it yourself ;)

__________________
Axim Advanced 400MHz PPC2003
Krusell Leather Case
256MB SD, 256MB CF, NSC BlueTooth CF, AmbiCom GPS CF

chengchichuan

My AXIM advance, I set processor speed to Maximum Performance, the following is result from CPUID:

CPU: PXA255/A0 or PXA26x/B1
CPU Current Frequency : 398MHz
Current Mode : Run
Turbo Mode Frequency : 398 MHz
Run Mode Frequency : 398MHz
PXbus Frequency : 199MHz
SDRAM max Frequency : 99MHz
MEM LCD Frequency : 99MHz
L=1 M=3 N=2
CP15 register0 : 69052d06

For your reference.

__________________
Johnny Cheng
----------------------------------
Advanced X5 with A05 ROM
*256MB Sandisk CF
*256MB Sandisk SD
*2000mA, 3800mA Extend Baterry
*CITIPAK IR keyboard
*Billionton BlueTooth CF
*ASUS Spacelink WL-110 wireless LAN CF

TheAce

As expected. The PPC2003 has access to these settings, or finally enables the device to "unlock" the 200MHz bus settings.
However for the rest of us still in PPC2002, only the "aftermarket" programs can achieve this result ;)

__________________
Axim Advanced 400MHz PPC2003
Krusell Leather Case
256MB SD, 256MB CF, NSC BlueTooth CF, AmbiCom GPS CF

Xgrind

I'm using Axim Basic with WM2003 and my bus speed is still at 99Mhz :( Ace, how does PPC2003 unlock the bus setting?

__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

- Axim X5 Basic (PXA255, A05, WM2K3)
- Sandisk 256MB CF card
- Toshiba 256MB SD card
- Innopocket Axim Aluminium Case
- Fulbond WIFI CF Card
- IR Portable Keyboard

TheAce

Quote:

Originally posted by Xgrind I'm using Axim Basic with WM2003 and my bus speed is still at 99Mhz :( Ace, how does PPC2003 unlock the bus setting?

I wouldnt know, because I dont actually have PPC2003, but I'm guessing it wont be that easy to o/c the Basic model to reach the Advanced model's frequencies that easy now.....;)

__________________
Axim Advanced 400MHz PPC2003
Krusell Leather Case
256MB SD, 256MB CF, NSC BlueTooth CF, AmbiCom GPS CF

starforce_chips

What is the web site to Pocket Hackmaster? I'm looking on Google and I can't find either the program's main page or the FAQ.

I want to use this program but I don't know where to start so I need some information.

__________________
Starforce

apaul

[QUOTE]Originally posted by chengchichuan
[B]My AXIM advance, I set processor speed to Maximum Performance, the following is result from CPUID:

Chengchichuan, how did you do that?

I mean, set the processor speed to max?

Planet-II

[QUOTE]Originally posted by apaul
[B]

Quote:

Originally posted by chengchichuan My AXIM advance, I set processor speed to Maximum Performance, the following is result from CPUID: Chengchichuan, how did you do that? I mean, set the processor speed to max?

That setting is only available in wm2003 if i am not wrong, in ppc2002, u have to use a 3rd party s/w like pocket hackmater.

jaydee

Can someone post a url for the pocket hackmaster download? I tried googling but couldn't find a site!
Thanks,

jaydee

apaul

I just pulled down v 2.43 from:

Pocket Hackmaster v 2.43

Good luck & Cheers!

davidt

Hello

I've upgraded to WM2003 and with maximum performance I've got a PXbus Frequency of 199MHz. I have the advanced X5 version.

David