__________________ breley | Aximsite/Mobility Site Review Staff, Administrator | Judge, Smartphone & Pocket PC Best Software Awards 2008 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
I've never tried this personally, but I've read you can take the battery out, replace the cover, and see if it will work on the ac supply. If it works then your battery has probably failed and needs to be replaced.
Ok, I had to know. Because I had a fresh backup handy, I went and pulled the battery and it works without it in the cradle. 2 things to remember are; the cover has to be in place and the ac adapter (not a usb port) must be used. The power button doesn't light at all in this state. You didn't mention if you're using an ac adapter or a usb port to charge the x50. The solid orange light you're getting generally indicates it's charging the main battery. Try leaving the device off for several hours and see if the battery will take a charge.
Well I just tried this on my x51v and it won't power on without the cover in place and locked. No error message like I thought. It just doesn't power on.
IT was GREEN but the minute I pull it out of the damn cradle, it doesn't turn on and it's orange again if I put it in the cradle...
+
No turning on without battery / cover...
Any Ideas people? (I think battery but idk how to say if it is or is not the unit...)
Thanx
Edit -> From forum i found
"Try this to rule out the battery.
Open the battery cover and remove the battery. Replace the cover and connect the axim to the mains power through either the cradle or ps and adapter. Try powering on the axim. A functioning axim will work this way without a battery"
SO pda is toast.
Thanx for info everyone. Please close :D