DanTheAximMan

Has anyone developed an easy way of removing their axim from the innopocket Mag. case? It sure takes a lot of effort!

nerdy_me

I bought this case recently and have not had issues removing it from the case...except maybe the first time. Maye sure you don't squeeze the sides as you remove it. If your ax is really tight you could try removing some of the lining. A friend of mine did this and his Ax now slides in and out with just a small push.

(X)

Olivek

I hold the case very lightly on the sides and push the axim out from the bottom and this works very well.

Mork

This question comes up so many times it should be in a FAQ

Push up from bottom - whilst holding the edge of the top back (one finger each side of the hinge)

DanTheAximMan

Originally Posted by Mork

This question comes up so many times it should be in a FAQ Push up from bottom - whilst holding the edge of the top back (one finger each side of the hinge)

Hey, that works. Thanks guys

ktvyeow

No matter what you do, don't press the sides inwards. It'll just make it tighter.

__________________
"The most overlooked advantage to owning a computer is that if they foul up,
there's no law against whacking them around a little." -Porterfield

MyPDA - Updated 1st December 2006

Check out my review on 'SPB Mobile Shell', 'Vito VoiceReminder', 'PhatPad 4.0' and 'What You Can Use Your Pocket PC For When Traveling'

Lat

Weird...with my innopocket, it slides out so easily i want it to be tighter =P

__________________
There are only 10 types of people in the world...those who understand binary and those who don't

liquidtiger720

i take mine out daily.

__________________

edu

i have no trouble taking mine out