|
adding reinforcement on your logitech wireless headphones' headband
here is how to apply reinforcement
the reason why the headband breaks on the middle is that part suffers 2 stress (bending and tearing)
to prevent breaking, you need to add the thickness of the middle part of the headband (reinforcement)
to apply reinforcement, you need:
a plastic strip (8mm x 50mm) cut from plastic card (unused credit card, or the card holds SIM card)
Krazy glue or CA (can obtained from hobbystore)
nylon packaging tape (it's recommended to protect/hold the plastic strip)
scotch tape
method:
if you found the headband is broken, do the fix with glue first, go to next step after the glue is dried
apply a small amount of glue on the headband, then put the plastic strip on there, and hold it close with scotch tape
apply glue SLOWLY along the gap, then use paper towel to wipe away excess glue
(this is recommended) use nylon tape to wrap the plastic strip, from the edge (5mm or 2" from the center) to the center, do it from left, then right, repeat it if you need it, wrap it nice and neat, and tight
Last edited by mingkee : 09-16-06 at 02:01 AM.
|
