Sorry.... let me correct that. I am using a Motorola HS820, a mono earpiece.
I can pair fine but can't get the sound/mic to route to the earpiece, it just stays with the Axim speaker. Is this part of the problem you guys are having currently or have I made some sort of setup mistake?
I got a MOTO HS820 as well,anybody knows about the solution,please let us know,thx
Firstly, a million thanks for making this a reality!
I will share the installation experience I had so that others who experience similar error as mine can try it.
I did a hard reset on my X51V on A06 and followed the instructions detailed for installing .37. When I did a soft reset, I had the memory error message and bluetooth would not start. Also my volume was permanently set to zero, that is even after adjusting the volume back up it would still go back to zero.
I read through the thread again and decided to patch the it with the .36 registry file. I did a soft reset and finally after 5hrs of hard resets and retries later, my bluetooth can be turned on!!!
I paired it with my Plantronics Pulsar 590A successfully, setup the audio gateway and sweet music pour out of my headphones with no jumps or lag at all...
I will be getting a Benq-Siemens S88 Handphone next week and will try to see if I can connect...
EDIT
To add on, the Plantronics headphone's volume and skip functions works with TCPMP. Just FYI since I remembered someone mentioned b4 that their headphone's keys don't work on TCPMP...
Once again, a million thanks once more for making this great development! :)
__________________
Ethan "Every Individual...has to retain his way of thinking if he does not want to get lost in the maze of possibilities. However, nobody is sure of having taken the right road, me the least."
~Albert Einstein 1953
Firstly, a million thanks for making this a reality!
I will share the installation experience I had so that others who experience similar error as mine can try it.
I did a hard reset on my X51V on A06 and followed the instructions detailed for installing .37. When I did a soft reset, I had the memory error message and bluetooth would not start. Also my volume was permanently set to zero, that is even after adjusting the volume back up it would still go back to zero.
I read through the thread again and decided to patch the it with the .36 registry file. I did a soft reset and finally after 5hrs of hard resets and retries later, my bluetooth can be turned on!!!
I paired it with my Plantronics Pulsar 590A successfully, setup the audio gateway and sweet music pour out of my headphones with no jumps or lag at all...
I will be getting a Benq-Siemens S88 Handphone next week and will try to see if I can connect...
EDIT
To add on, the Plantronics headphone's volume and skip functions works with TCPMP. Just FYI since I remembered someone mentioned b4 that their headphone's keys don't work on TCPMP...
Once again, a million thanks once more for making this great development! :)
AVRCP works with TCPMP? What did you have to configure or did it wotk all by itself?
So really just A2DP and AVRCP work, but no HSP or HFP??
What do we think the problem is?
__________________
BM
"If the automobile had followed the same development cycle as the computer, a Rolls-Royce would today cost $100, get one million miles to the gallon, and explode once a year, killing everyone inside." Robert X Cringely
Addition who needs that kind of stuff any way huh?
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Who cares if I'm only 16? To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
When I first installed it, activesync didn't work to my work laptop. I did a quick restore with sprite. Followed the instrs. to a tee and it work on my second onstall, this on was a manual install. My first install was using the cab file and the reg file.
Other then that, I have had no problems syncing to 2 computers. One are home and the other at work. Plus i'm syncing to my works exchange server.
Yes, huge problems. I have been unable to recover. Let me know if you want details.
__________________ Dell Support Rep on 1/12/06: Only a small number of users are having issues (WM5 on x50v)... Dell will be releasing (update for x50v) but it will not be soon.
Yes, huge problems. I have been unable to recover. Let me know if you want details.
Try to hard reset and then do a recovery from there using the backup file. Did mine that way and it was ok. A recovery from the existing system just would not work...:)
Wow, My network bt works great at over 700k/sec. Next I will try the bt Active Sync. The bt Audio works without skipping on Motorola BT820 stereo headphones.
Earl
P.S. The site here is working much better today. I uploaded my avatar and all.
FYI, I was able to connect to my Jabra BT 250v hands free headset. I get a hissing noise when it connects but it keeps the connection open. Does anyone know of any software I can try to see if I can hear/record sound thur it?
Yeah, please let us know how you made the AVRCP work with TCPMP? I understand there is an option like "enable widcomm bt button", but it didn't do anything.
Originally Posted by thunderstreich
AVRCP works with TCPMP? What did you have to configure or did it wotk all by itself?
__________________ Current Device and Accessories:
Imate Jasjar & HP HW6915
BT338 BT GPS, 2GB Transcend MiniSD, 1GB Lexar CF, 1GB ATP SD, Sonorix Bluetooth headphone w/mic and mp3. ThinkOutside BT mouse, Gum-size CF reader
Follow Us
RSS Feed
Follow on Twitter
Facebook
YouTube
