Tutorial : How to revive a bricked x51(v) using Domme's SD ROM loader tutorial. - Page 5

jleinenbach · 06-01-07, 08:35 PM

Originally Posted by emittt

Please anybody help me: when I pressed W-Fi+ Power button+reset and than is saying "Image checksum file not found " Please HELP

You should try an empty SD card. This helped me.

Jens

cychong · 06-26-07, 10:52 AM

Originally Posted by jleinenbach

You should try an empty SD card. This helped me.

Jens

If you don't mind had experience the same problems, check all possible file naming error for the nbo and crc file but could not figure out what when wrong. "Image checksum file not found"
Have tried with several SD card (all 1 GB) but same resolve, it seems that the bootloader could not recognize the crc file (created from note pad and exactly 8byte).
Please help.

hhbarrientos · 06-27-07, 10:27 AM

Originally Posted by mrtdgn

Thanks for the method. My x51v is back to life. However I have two problems:

1) The x51v still by passes the screen at hard reset
2) I still can not upgrade to the A12 ROM from desktup. After the first hardreset the upgrade utility in PC freezes; the screen of utility on PC does not change.

Hello Everyone,

I also have the same problem. I was already able to flash A12 Rom Eng to my X51v according to the tutorial. The System Information in the AX already has A12 as ROM Version.

I did the Power+Reset after flashing as instructed but the Hard Reset screen just passes by, no option to press the Contacts button to Hard Reset.

Am I missing a step in the reflashing process? Would a reflash to A06 Eng ROM fix this issue?

Thanks in advance for the help.
HH

makuu · 06-27-07, 11:17 AM

Everything is in the tutorial, if you have an error concerning the crc file it's because you have a typo in the filename. You can only be successfull in flashing a rom if it fits the bootloader.

cychong · 06-29-07, 11:07 AM

Originally Posted by makuu

Everything is in the tutorial, if you have an error concerning the crc file it's because you have a typo in the filename. You can only be successfull in flashing a rom if it fits the bootloader.

Dear makuu,

Could you please give me more info? Really killing me to get it back on the track.
What you mean if I have a typo in the filename?
Did check on the top of the screen during my Axim enter the SD boot menu and it display " SD Image Update AXX_G3" does this means I have a different bootloader from the others? What shall I do now?

rumble291 · 07-06-07, 06:05 PM

Thanks for this! What would i do with out this tutorial and bootloader :feww:

Azard · 07-09-07, 12:51 AM

Hi,
I need to download the little program mentioned by makuu in the first post.
The link goes to a french website which I cannot understand. Can anyone kind enough to give another link download. Thanks

makuu · 07-09-07, 02:15 AM

just fill the two empty box with user/password host/host and click connexion.

goro4u · 07-29-07, 02:55 PM

Well I seem to have done all the files correctly, formatted the SD card etc... But when I go into bootloader (wireless button + Power and reset) it shows "SD Image Update A10_G3" and I press action key twice, nothing happens...absoultly nothing....

Any help would be greatly appreciated as my Axim is currently nothing more than a paper wieght.

Well nevermind....seems it did do something!! It worked!!

Nice tutorial, thanks alot!!

glopje · 08-11-07, 07:27 AM

I had almost given up but my X50v is working again thanks very much

sert30 · 08-14-07, 05:43 PM

Dear makuu,
I have an x51 and I need an SD image for it, or I bricked it

. Please give some advice. Thanks

makuu · 08-14-07, 06:19 PM

If your axim is still covered by guaranty better contact Dell tech sup, otherwise you can build the nb0 like mentioned in the tutorial. However our website is down for the moment so you will have to wait until it recovers to get the tool.

archet216 · 08-16-07, 10:30 PM

can somebody build a nb0 fle for wm5 for x50, not x50v

i need those files to revive my axim. please help me

archet216 · 08-17-07, 12:53 AM

http://www.aximsite.com/boards/showthread.php?t=112012

WHY CANT ACCESS

archet216 · 08-17-07, 12:54 AM

http://www.aximsite.com/boards/showthread.php?t=112012
why ant i acces tis thread?
it gives me he following error

archet216, you do not have permission to access this page. This could be due to one of several reasons:

1. Your user account may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system?
2. If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation.