X50V from WM5 A01 to WM5 A02

[mp998]

hi i cant upgrade to wm 5 A01 with my computer because i don't have a cradle so i need the files

[johnhu_2005]

Never mind, I see maglite was kind enough to put one on Rapidshare.

RapidShare: Easy Filehosting

If you don't know how to flash a new ROM, please ask us before using that file.

As always, BACKUP EVERYTHING before any flashing.

[mp998]

i have tried that but i don't know which files are the crc or the nb0 files

[johnhu_2005]

Edit:
Refer to Steven's post: Easier way to recover your X50 after you bricked it+premade nb0 files

[mp998]

thanks for the help

[Steven855]

Place all 4 on a formatted SD card.

Two are for the bootloader.
Two are for the OS itself.

Flashing steps (if you don't know):

1. Backup everything :exc:
2. Put all 4 files on a SD card formatted to FAT.
3. Fully turn off Axim
3. Press Power and wireless button together
4. While holding the two, press the reset hole
5. While still holding the two, release the reset hole
6. When a screen pops up, release the Power and Wireless button
7. Select WM5 A01 ROM
8. Double tap the center D-pad button
9. DO NOT let the battery run out (put it on a cradle)
10. Follow directions given (The process takes about 20-40 minutes)

You should have just redirected to my flashing sticky for instructions. The file system for the SD card should be "FAT32", and not "FAT". You have to flash the bootloader file first (incidentally, it has a "b" in the filename)and then the os file (has "k" in the filename).

[johnhu_2005]

Yes, you are correct. I did not notice there were flashing instructions for the x50v
I thought FAT works with mine.