VGA-Video out really Works... i can´t believe it... - Page 2

new2axim · 08-06-05, 02:16 PM

Originally Posted by Dad

Nice Idea! :approve: You don't need a mouse with Nyditot - Your PDA becomes a touchpad.

With Nydiot in this mode does 'tapping' on the PDA act as a mouse click, like most touchpads?

nyditot · 08-10-05, 08:43 PM

NVD 4.21 has just been released.

As a special thanks to everyone following and contributing to this thread we'd like to give you a 15% discount. Just click here to be taken to the Nyditot Shopping Cart where the discount will be applied.

Thanks again for all your help.

The X50v rocks!

new2axim · 08-10-05, 11:02 PM

Originally Posted by new2axim

With Nydiot in this mode does 'tapping' on the PDA act as a mouse click, like most touchpads?

Anyone?

I looked through the online "User's Manual" but didn't see an answer for this.

skirep · 08-11-05, 03:39 AM

Hi!
you can see a photos with TFT + Axim X50V + virtual keyboard :

www.vadejocs.net/skirep/ppc-vkey.jpg
www.vadejocs.net/skirep/ppc-vkey2.jpg

CU!

biohzrd · 08-11-05, 08:17 AM

Originally Posted by skirep

Hi!
you can see a photos with TFT + Axim X50V + virtual keyboard :

www.vadejocs.net/skirep/ppc-vkey.jpg
www.vadejocs.net/skirep/ppc-vkey2.jpg

CU!

What resolution is that display running? Are you using the nyditot program?

skirep · 08-11-05, 10:15 AM

Originally Posted by biohzrd

What resolution is that display running? Are you using the nyditot program?

The resolution is 1024x768 using Nyditot and the software works very fine :).

stenneth · 08-19-05, 08:23 PM

I just bought a VGA out cable to allow me to use my axim for powerpoint presentations at work but it won't work with the projector they have. The video out is fine when I connect to a standard CRT monitor, but with the projector I get a "frequency is out of range error". I've tried in mirror mode, with Nyditot, with Clearvue and with the enhanced GAPI drivers. None of this makes any difference and none of these programs allow the output frequency to be altered from its default 60Hz. Having said this, I have no idea why it isn't working in the first place, as the projector is a Sony SVGA VPL-CS7, and the specifications suggest that it should be able to handle all the resolutions and frequencies that the axim can possibly throw at it.

Any suggestions? If I can't get things working my VGA out cable has just been a big waste of money.

08-19-05, 09:34 PM

Perhaps try a lower resolution... the projector might prefer that.

@medevo - thats a really neat idea. I hope you can get it to work. Then maybe we can use that for gaming! ^_^ lol

stenneth · 08-20-05, 09:54 PM

Still no luck with the Sony SVGA VPL-CS7 projector - it just doesn't seem to like the Axim video out signal. I've tried all resolutions and screen orientations and even upgraded to the latest bios (A05). Does anyone know if the default output refresh rate can be altered from 60Hz - its the only other thing I can think of, although the projector specifications suggest that it should support all 3 possible axim output resolutions at this frequency anyway.

08-20-05, 10:47 PM

I don't believe that you can change the refresh rate. I did a good amount of beta testing on the Nyditot software and the intel chip can output up to 1280x1024

Also, someone was asking about "tapping

08-20-05, 10:50 PM

I don't believe that you can change the refresh rate. I did a good amount of beta testing on the Nyditot software and the intel chip can output up to 1280x1024

Also, someone was asking about "tapping" being the same as clicking. Answer: It is the same.

I have the Dell branded ThinkOutside bluetooth keyboard and the ThinkOutside Bluetooth mouse, The keyboard works great, but the mouse is, so far, incompatible with Nyiditot Virtual Display.

08-20-05, 10:53 PM

One more thing, Nyditot Virtual Display software does not strech the display, everything gets tinyier(sp?) the higher the resolution you go.

darkdestroyer · 08-20-05, 11:21 PM

Originally Posted by Dad

A full port dock for the X50v :approve: :approve: You could sell that if you could squeeze keybaord/Mouse/VGA and Power into a single multi tentacled cable - hell I'd buy one just coz it existed! All the inputs are there on the Axim - I reckon this is well worthy! Let me know if you go any further with it!

Is it possible for the X50v to ahve a USB host capability via the dock connector?
The Asus Mypal has this via the dock connector, i was wondering if the Axim had this capabiltiy.
I know it's not advertised by dell, but i've heard of
"hidden connectors" or pins down there that have this functionality, but not able to do it because of the lack of software.
Also is it possible to make a single multi tentacled cable?

new2axim · 08-21-05, 01:24 PM

Originally Posted by darkdestroyer

Is it possible for the X50v to ahve a USB host capability via the dock connector?
The Asus Mypal has this via the dock connector, i was wondering if the Axim had this capabiltiy.

All I know is that I'd kill to have USB funcionality without spending $130 on a CF USB host.

I'm using my x50v with an in-car touch screen but I can't use the touch screen functionality because I can't connect to the Axim via USB :(

darkdestroyer · 08-21-05, 02:45 PM

Yes yes!!!! I'd KILL to have USB functionality also. Please Please any word on this? I hear the Linux Project enables USB host, any1 have any ideas?