astibo

hi at all
since yesterday my axim x51v with new wm 6.1 worked very well
today the joystick , the scroll button and the contact don't work. the 3 remain button yes.
Could be something bad in the flexible cable? the buttons phisically seem to work
Thanks for your help in advance

johnhu_2005

You might want to boot into diagnostic mode to test the buttons.

Steps:
1. Turn off your Axim fully
2. Press the "record button" and the power button simultaneously
3. While holding the two buttons, press the reset hole with your stylus
4. While holding the two buttons, release the reset hole
5. Wait for the diagnostic screen to pop up
6. Release the "record button" and the power button

__________________
Currently running LennySh L11 ROM on my x51v.
Currently running LennySh A09 ROM on my x50v.
~~~~~~~~~~~~~~
To support me,
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
!

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

KimChee

Your connector might have come undone from the motherboard, it's happened to me a couple of times, if diagnostic mode doesnt work you might consider taking it apart to seat the connector on the motherboard.

__________________
Dell Axim X51v wm 6.5 L14 Palm-Center 128mb RAM upgrade, Widcomm BT Stack, Innopocket Mag Case, PNY 16 GB sdhc, Kingston 16 GB CF Card, Jabra BT 620 headphones

Dell Axim X30 624 mhz-Belkin snap on keyboard, extended battery

astibo

i've tried to seat it and now the joystick work but not other two buttons. there only one position no?
thanks again